Includes all the files you need to 3D print this articulating camera arm!

Based on the Woby Camera Jig.

Files are in both STL and 3MF format.

In addition to the 3D printed pieces, you will need:

• (14) x 5/16” – 18 x 2” button head screws

• (1) x 5/16” – 18 x 1” carriage bolt

• (1) x ¼” – 20 hex nut

• (1) x ¼” – 20 screw

• 3/4” pipe clamp (or other method of mounting pipe to a wall, table, etc.)

• 3/4” black steel pipe

• Ball head mount

Filament I used in this project:

• Duramic White and Grey PETG

• Polymaker Red PLA

All pieces except for the washers and handle are printed out of PETG with 6 perimeters, 0.2mm layer height and 15% gyroid infill.

I would recommend printing the threaded base plate with 25% gyroid infill for added strength.

The washers are printed out of PLA with 0.2mm layer height and 100% infill (all perimeters).

The handle is printed out of PLA with 7 perimeters, 0.2mm layer height and 25% gyroid infill.

You will need to print the “strut” file 8 times, as 8 struts are necessary for the camera arm. The rest of the files only need to be printed once.

For more details about printing and assembling, watch the build video here!

For personal use only.